ADENDORFF MAC AFRIC SWRENC-001 Orijinal Kullanım Talimatları - Sayfa 3
Elektrikli Alet ADENDORFF MAC AFRIC SWRENC-001 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. ADENDORFF MAC AFRIC SWRENC-001 11 sayfaları.
Sayfayı Yazdır
controlled with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
preventive safety measures reduce the risk of starting the power tool accidentally.
20. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use.
maintained power tools.
22. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
power tool for operations different from those intended could result in a hazardous
situation.
Battery Tool Use and Care
24. Recharge only with the charger specified by the manufacturer.
for one type of battery pack may create a risk of fire when used with another battery
pack.
25. Use power tools only with specifically designated battery packs.
battery packs may create a risk of injury and fire.
26. When battery is not in use, keep it away from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may cause sparks, burns, or a
fire.
27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Such
Power tools are
Many accidents are caused by poorly
Use of the
A charger that is suitable
Use of any other
Service
28. Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
SPECIFICATIONS
Model
Power (DC)
Square Drive
Bolt Size
Type
Battery
Capacitor
No Load Speed
Impacts per Minute
Step L
Torque
Step H/ Smart-loosen Step
4.0Ah
Full Charging Time
5.0Ah
Weight (Inc. Battery)
※ Due to the continuing program of research and development, the specifications herein are
subject to change without prior notice.
ADDITIONAL SAFETY RULES
1. To be safe, disabled, retarded, untrained people or people disable to operate
independently, including young children, are discouraged to operate the tool without
supervision. Young children should be supervised to ensure that they do not play with the
tool.
2. Check the tool and battery carefully before putting it into use. Stop operation immediately
when malfunctions be found and send the tool to be repaired by qualified serviceman. Do
not open the tool yourself.
3. Use only original MAC AFRIC SBATTR-002/004 type rechargeable Li-Ion battery for this
tool and recharge only with the MAC AFRIC SBATTR-002/004 type charger supplied with
the tool. Use of other type of battery or charger, e.g. imitated, modified or with other
SWRENC-001
18 V
12.7 mm
M12-M18
Li-ion
4.0Ah
5.0Ah
0-2000/0-2400 rpm
0-2900/0-3200 ipm
240 N·m
300 N·m
≈90mins
≈100mins
1.8 kg