Autool X50 Plus Kullanıcı Kılavuzu - Sayfa 6
Ölçüm Cihazları Autool X50 Plus için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Autool X50 Plus 8 sayfaları. Car obd multi-function meter
Ayrıca Autool X50 Plus için: Hızlı Kurulum Kılavuzu (14 sayfalar)
Sayfayı Yazdır
Instrument standby time-After the car flames out, the set
value is reached, and X50 Plus will sleep automatically.
Car speed error correction - When the car speed meter
displays 100 km/miles status, adjust X50 Plus display to
be in accordance with the car speed meter. If X50 PLUS
shows 100km/h, the car speed shows 107km/h, then
change the 100% parameter to 107% is ok.
Battery voltage correction - Correct voltage display
accuracy settings in X50 Plus.
Alarm voltage settings - Set up this parameter to remind
car owners whether the battery is damaged.
Instrument digit color - Seven colors are available for
option, users can carry out settings based on their
preference.
Car speed reset settings - In idle modes, if the car
speed is lower than the set value, the car speed will be
displayed as zero.
Fuel consumption data correction - If there is an error
between average fuel consumption displayed in X50
Plus and actual fuel consumption, adjust this parameter.
If the displayed fuel consumption is bigger than the
actual one, decrease the percentage, otherwise
increase the percentage.
9
Factory reset settings-Choose this function to restore
X50 Plus data to initial status.
Instrument interface settings
This function will configure contents displayed in X50
Plus.
In operating state, X50 Plus can display four data on the
display screen. These four data correspond to the
following contents:
10