HighPoint SSD7103 Kurulum Kılavuzu - Sayfa 11

Kontrolör HighPoint SSD7103 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HighPoint SSD7103 13 sayfaları. Linux ubuntu desktop 19.10
Ayrıca HighPoint SSD7103 için: Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (15 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (11 sayfalar), Hızlı Kurulum Kılavuzu (9 sayfalar), Kurulum Kılavuzu (12 sayfalar)

SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to

software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

When the system updates the kernel packages, the driver module hptnvme.ko should be

built and installed manually before reboot.

Please refer to the REAME file distributed with HighPoint

on how to build and install the driver module.

If you forget to install the open linux driver before updating the kernel, the system

crash cannot enter. Please follow the steps below.

a. Press and hold the keyboard up and down button when booting, until the following

interface appears.

Choose " Advanced options for Ubuntu " and press Enter

b. Select the default kernel (4.15.0-67-generic)and enter the system.

c. Install Linux open source driver.

SSD7103

controller. Installation of the management

open source package

SSD7103

- 9 -