Maisi M20 Hızlı Başlangıç Kılavuzu - Sayfa 8

Video Kamera Maisi M20 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Maisi M20 17 sayfaları.

2.3 Connecting to Power

Use only the supplied car charger to power up the camcorder and charge the built-in battery.

1. Connect one end of the car charger to the USB connector of the camcorder.

USB port input: DC 5V / 1A.

2. Plug the other end of the car charger to the cigarette lighter socket of your vehicle. Once the

vehicle engine is started, the camcorder will automatically turn on.

Car charger input: DC 12 / 24V.

Note:

1. Use the product with the supplied charger only, please do not use other power chargers to

avoid camera burn or cause the battery explosion.

2. When use this camcorder for the first time, please charging to battery full.

3. Please be noted that if the ambient temperature reaches 45° C or above, the car charger

may supply power to camcorder, but it will not charge the Lithium-ion battery.

2.4 Camcorder on/off

2.4.1 Auto On/Off: the device will automatically turn on when the car engine starts up, and

automatically start recording when the camcorder turns on. Once the engine stopped, the

device will automatically save the recording and turn off (Please set <Delay Power Off> to 15s,

see Page 9).

2.4.2 Manual On/Off: long press the power button to turn on/off the camcorder.

2.5 Set date and time prior to use

2.5.1 The device will automatically start recording when turns on, please press the OK button

to stop recording and enter Standby Mode.

2.5.2 Press the Menu button once to enter Recording setting, press ▼ button to select <Time

Zone>, press OK to enter time zone setting, press▲/▼ to set the time zone to <+0> for UK,

Press OK button to confirm.

2.5.3 From Standby Mode, press Menu button twice to enter system setting, press ▼ button to

select <Time Setup>, press OK button to enter time setting. Press the ▲or▼ button to adjust

enter

the value of date/time, press the OK button to

another field. Press OK button to confirm

the value and press Menu button to exit.

Page 7 of 16