IKEA BEKANT 592.818.14 Talimatlar Kılavuzu - Sayfa 6
İç Mekan Mobilyaları IKEA BEKANT 592.818.14 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. IKEA BEKANT 592.818.14 16 sayfaları.
Sayfayı Yazdır
Safety regulations
• When the table is run up/down, keep
the necessary safety distance to avoid
the risk to get squeezed between the
moving table top and fixed objects in
the surrounding area.
• When the table is run up/down the
user shall keep watch so that nobody
is injured or no object is damaged. The
table top must not bump into a fixed
object so that the table is overturned.
Always remove any office chair before
the table is run up/down.
• When the table is left unattended, the
safety key must be removed from the
hand control and placed out of reach
of children.
• The table tripod must not be altered
or reconstructed in any way. In
service and repair work of the table,
the electrical cable must always be
disconnected from the wall socket.
• Alterations to the control box are
absolutely forbidden!
• The table must not be used as a
hoisting device for persons.
Double insulation
SERVICING OF DOUBLE-INSULATED PRODUCT.
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product , nor is
a means for grounding to be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the
system, and to be done only by qualified service personnel. Replacement parts for
a double-insulated product must be identical to the parts they replace. A double-
insulated product is marked with the words, "DOUBLE-INSULATION" or " DOUBLE
INSULATED".
The symbol (square within a square) is also able to be marked on the product.
Maintenance and repair instructions
• After approx. 1 week of use, check that
the screws are properly tightened.
• If the table cannot be lowered or
raised, check the connections between
the legs and the wall socket and be
sure the safety key is inserted in the
hand control.
• If any part of the electrical system is
replaced, the electrical cable must first
be disconnected from the wall socket.
Replace the electrical part and then
connect the electrical cable to the wall
socket. The table is now ready for use.
If the table still does not work, please
contact your nearest IKEA store or
customer service.
Manufacturer:
IKEA of Sweden AB
Address:
Box 702, SE-343 81 ÄLMHULT
SAVE THESE INSTRUCTIONS
6