Airflow Adroit DV51CH Bakım Kılavuzu

Fan Airflow Adroit DV51CH için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. Airflow Adroit DV51CH 2 sayfaları. Filter maintenance

Sayfayı Yazdır

MVHR (Mechanical Ventilation with Heat Recovery) units require regular filter maintenance (cleaning or

replacement). The Airflow MVHR units have been designed to facilitate convenient access to the filters with easy

maintenance in mind. The Airflow filters are tested and compliant with ISO 16890.

This filter replacement guide is specific for the following products. (It also applies to the EPH unit versions):

Product no

90001174

90001175

90001172

90001173

90001184

90001185

Filter replacement indication

This unit does not have a safety switch that turns the power off when the door is opened.

Always disconnect the power plug before starting the ventilation unit maintenance. The maintenance reminder

indicates filter replacement with a pop-up window.

To acknowledge the maintenance reminder message, press the tick button.

Press the back button to postpone the reminder for one week.

When the maintenance reminder is activated, check the cleanliness of the filters and replace them if required.

The Adroit ventilation unit has three air filters:

2 x ISO Coarse > 75% (G4) - complies to ISO 16890, coarse filter; filters insects, heavy pollen and other relatively

large foreign objects out of the outdoor air (A).

1 x ISO ePM1 50% (F7) filters - complies to ISO 16890 fine filter; filters microscopic pollen and dust particles out of

the supply air (B).

The coarse filter; filters the extract air and keeps the heat recovery cell clean (C).

The filter replacement interval depends on the ambient particle concentration. It is recommended that the filters are

replaced every spring and autumn or at the very least once a year.

To replace the filters, follow the next steps:

1. Disconnect the ventilation unit from the mains power supply.

2. Open the door of the unit.

CAUTION: The door is heavy.

3. Lift the door off.

4. Remove the old filters (A, B, C) and discard them.

5. Install the new filters (A, B, C).

6. Close the door of the unit.

7. Plug the ventilation unit back into the mains.

8. The filters have now been successfully replaced.

Using original filters ensures that the ventilation unit has high performance.

Adroit DV51- DV51CH Units

Filter Maintenance Guide

Description

DV51CH (R) Adroit with white cooker hood & integral CO

DV51CH (L) Adroit with white cooker hood & integral CO

DV51CH (R) Adroit with stainless steel cooker hood & integral CO

DV51CH (L) Adroit with stainless steel cooker hood & integral CO

DV51(R) Adroit with integral CO

DV51(L) Adroit with integral CO

sensor

Page 1/2