ADF Web HD67213M Kullanıcı Kılavuzu - Sayfa 11

Ağ Donanımı ADF Web HD67213M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ADF Web HD67213M 16 sayfaları. Gateway / adapter

Industrial Electronic Devices

UPDATE DEVICE VIA SERIAL

Section "Update Via Serial" (Fig. 7):

In order to load the parameters or update the firmware in the gateway,

follow these instructions:

Turn off the device;

Connect the Null Modem cable from your PC to the gateway;

Insert the Boot Jumper (see the Fig. 1 for more info);

Turn on the device;

Check the "BOOT Led". It must to blink quickly (See the Fig. 1 for

more info);

Select COM port and press the "Connect" button;

Press the "Next" button;

Select operations you want to do. Can select only Firmware or only

Project or both;

Press the "Execute update firmware" to start the upload;

When all the operations are "OK" turn off the device;

Disconnect the Boot jumper;

Turn on the device.

At this point the configuration/firmware on the device is correctly updated.

ADFweb.com Srl – IT31010 – Mareno – Treviso

Figure 7: "Update Via Serial" windows

User Manual J1939 to Ethernet

Document code: MN67213_ENG

Revision 1.002

INFO:

www.adfweb.com

Phone +39.0438.30.91.31

Page 11 of 16