ADGT EDM106-G Kullanıcı Kılavuzu - Sayfa 6

Medya Dönüştürücü ADGT EDM106-G için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ADGT EDM106-G 19 sayfaları. Serial-to-ethernet converters

Sayfayı Yazdır

Product appearance

Design of the converter provides a metal housing with an IP30 protection class. Description of
connectors and buttons at the panels of the device case is presented on Fig. 2.
№
Connector
Front panel view
1
RS-232
2
ETHERNET
3
ST, TX, RX
Back panel view
XP1
Connector -
4
breakaway
terminal block
5
RST
XP2
Connector -
6
breakaway
terminal block
PWR
7
Connector - 6P6C
1 EDM106: T (T1, T2) – terminal resistor output.
EDM106-G: G (G1, G2) – isolated ground connector.
Phone: +420 538 890 720
Fig. 2. Converter EDM106. Device appearance.
Contact
Interface RS-232, connector – DB9-F
Ethernet 10/100Base-TX, connector – RJ45
LED indicators ST, TX, RX
A1
Signal "A+" RS-485 (1)
B1
Signal "B-" RS-485 (1)
T/T1
Lead of the pluggable terminal resistor 1
(G/G1)
(connect with output B/B1 ("B-") to plug-in)
1
A2
Signal "A+" RS-485 (2)
B2
Signal "B-" RS-485 (2)
Lead of the pluggable terminal resistor 2
T2 (G2)
1
(connect with output B2 ("B-") to plug-in)
Reset / Switch to console mode button
VO
Output 8.5B for power supply of external devices
G
Ground
VI
Low voltage power input 10-30 VDC
1
Low voltage power input 10-30 VDC
2,3,4,5
Not used
6
Ground
6
EDM Serial-to-Ethernet Converters
User Guide ver. 2.0 | 2021-09-01
Table 2. EDM106. Description of contacts and connectors.
Description
Output "Y+" of RS-422 line
Output "Z-" of RS-422 line
Output "A+" of RS-422 line
Output "B-" of RS-422 line