Makita 6223DWE Kullanım Kılavuzu - Sayfa 9

Matkap Makita 6223DWE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6223DWE 16 sayfaları. Equipped with electric brake

ASSEMBLY

Installing or removing driver bit or drill bit

CAUTl ON :

Always be sure that the tool is switched off and the battery cartridge is removed before

installing or removing the bit.

Hold the ring and turn the sleeve counter-

clockwise to open the chuck jaws. Place

the bit in the chuck as far as it will go. Hold

the ring firmly and turn the sleeve clock-

wise to tighten the chuck.

To remove the bit, hold the ring and turn

the sleeve counterclockwise.

OPERATION

Switch action

Tool speed is increased by increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger. Release the trigger to stop.

CAUTION:

Before inserting the battery cartridge into the tool, always check to see that the switch

trigger actuates properly and returns to the "OFF" position when released.

Reversing switch action

This tool has a reversing switch to change

the direction of rotation Slide the reversing

switch to the left for clockwise rotation or

to the right for counterclockwise

CAUTION

*Always check the direction of rotation before operation

*Move the reversing switch only after the tool comes to a complete stop Changing the

direction of rotation before the tool stops may damage the tool