Align-Pilates A2RII Reformer Montaj Kılavuzu & Kullanım Kılavuzu - Sayfa 5

Eliptik Eğitmen Align-Pilates A2RII Reformer için çevrimiçi göz atın veya pdf Montaj Kılavuzu & Kullanım Kılavuzu indirin. Align-Pilates A2RII Reformer 12 sayfaları.

Sayfayı Yazdır

Align-Pilates A2RII Reformer Montaj Kılavuzu & Kullanım Kılavuzu

Fig. 15

Fig. 14

Foot Strap installation:

1) Separate the strap in to 2 parts. Taking one half of the strap, thread the nylon loop through the eyelet on the re-

former frame under the jump board (Fig. 16)

2) Now pass the foot strap through the loop and pull tight (Fig. 17)

3) Repeat this process for the other half of the strap (Fig. 18) and finally re-thread the strap through the

D-ring (Fig. 19) and the strap is ready to use (Fig.20).

Fig.16

Fig.17

Fig.18

Fig.19

Fig.20

Attaching the Ropes to the Reformer & Adjusting Rope Length

The A2RII includes our Pro Rope Adjusters

which allow you to easily & quickly change

the rope length of an individual rope, or

both together, to offer maximum versatility

and convenience.

Simply pull down the cam lever and slide

the rope forward or backward to the desired

length and then release the cam. The Pro

Rope Adjuster means you can get the

perfect setup every time for any person,

Fig.21

Fig.22

allowing you to completely focus on your

own or your client's repertoire.

Adjusting the Rope Pull Height

The rope pull height can be adjusted by

loosening the rope height adjustment knob

(Fig. 23) and then pulling the knob outwards

(Fig.24). Slide to the desired height and ensure

the pin engages in one of the holes, then

tighten the knob to prevent rattle.

Fig.23

Fig.24