Garmin VOACTIVE 3 Kullanıcı El Kitabı - Sayfa 27

İzle Garmin VOACTIVE 3 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin VOACTIVE 3 34 sayfaları.
Ayrıca Garmin VOACTIVE 3 için: Kullanıcı El Kitabı (28 sayfalar)

Sayfayı Yazdır

too high.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire

GPS signals and pair your device with the foot pod

(Pairing Your Wireless Sensors, page 21)

The foot pod is self-calibrating, but you can improve

the accuracy of the speed and distance data with a few

outdoor runs using GPS.

1 Stand outside for 5 minutes with a clear view of the

sky.

2 Start a running activity.

3 Run on a track without stopping for 10 minutes.

4 Stop your activity, and save it.

Based on the recorded data, the foot pod calibration

value changes, if necessary. You should not need to

calibrate the foot pod again unless your running

style changes.

Using an Optional Bike Speed or Cadence

Sensor

You can use a compatible bike speed or cadence sensor

to send data to your device.

• Pair the sensor with your device

Wireless Sensors, page 21)

• Set your wheel size

(Calibrating Your Speed Sensor,

page 22)

(Going for a Ride, page 11)

• Go for a ride

Calibrating Your Speed Sensor

Before you can calibrate your speed sensor, you must

pair your device with a compatible speed sensor

(Pairing Your Wireless Sensors, page 21)

Manual calibration is optional and can improve

accuracy.

Before you can update your device software, you must

download and install the Garmin Express application

and add your device

(Using Garmin Connect on Your

Computer, page 17)

1 Hold the touchscreen.

2 Select Settings > Sensors & Accessories > Speed/

Cadence > Wheel Size.

3 Select an option:

• Select Auto to automatically calculate your wheel

size and calibrate your speed sensor.

• Select Manual, and enter your wheel size to

manually calibrate your speed sensor

and Circumference, page 27)

Situational Awareness

Your vívoactive 3 device can be used with the Varia

Vision device, Varia smart bike lights, and rearview

radar to improve situational awareness. See the

owner's manual for your Varia device for more

information.

(Pairing Your

(Wheel Size

NOTE: You may need to update the vívoactive 3

software before pairing Varia devices

Software Using Garmin Connect Mobile, page 23)

tempe

The tempe is an ANT+ wireless temperature sensor. You

can attach the sensor to a secure strap or loop where

it is exposed to ambient air, and therefore, provides

a consistent source of accurate temperature data.

You must pair the tempe with your device to display

temperature data from the tempe.

Device Information

Charging the Device

This device contains a lithium-ion battery. See the

Important Safety and Product Information guide in the

product box for product warnings and other important

information.

To prevent corrosion, thoroughly clean and dry the

contacts and the surrounding area before charging

or connecting to a computer. Refer to the cleaning

instructions in the appendix.

1 Plug the small end of the USB cable into the

charging port on your device.

2 Plug the large end of the USB cable into a USB port

on your computer.

3 Charge the device completely.

Product Updates

On your computer, install Garmin Express

garmin.com/express). On your smartphone, install the

Garmin Connect Mobile app.

This provides easy access to these services for Garmin

devices:

• Software updates

• Data uploads to Garmin Connect

• Product registration

(Updating the

WARNING

NOTICE

(www.

VÍVOACTIVE