AEG OKO_FAVORIT 64800 Kullanım Talimatları Kılavuzu - Sayfa 11
Bulaşık Makinesi AEG OKO_FAVORIT 64800 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG OKO_FAVORIT 64800 42 sayfaları. Aeg dishwasher öko favorit 64800
Ayrıca AEG OKO_FAVORIT 64800 için: Kullanım Talimatları Kılavuzu (48 sayfalar)
Sayfayı YazdırBefore using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the installation
instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour half a litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove minerals and
salts from the water supply, which would have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and PPM
(parts per Million).
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be adjusted.
Level
(german degrees)
0
1
2
9 - 11
3
12 - 17
4
18 - 22
5
23 - 28
6
29 - 33
7
34 - 39
8
40 - 45
9
46 - 50
If your water hardness is level 1 it is already soft and therefore there is no need
to use salt. With the setting of the water softener at level 0 the salt indicator
light on the control panel will always remain off.
Water hardness
°dH
°TH
(french degrees)
0 - 4
0 - 8
5 - 8
9 - 14
15 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
81 - 90
PPM
(parts per million)
0 - 80
81 - 140
141 - 200
201 - 300
301 - 400
401 - 500
501 - 600
601 - 700
701 - 800
801 - 900
Use of salt
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
11