AEG VA6011LT Kullanıcı Talimatları - Sayfa 33
Bulaşık Makinesi AEG VA6011LT için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AEG VA6011LT 48 sayfaları.
Sayfayı YazdırWhat to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.
...Error messages are displayed.
If your appliance is equipped with an optical floor signal, in the event
of an error a dot-shaped optical signal will flash on the floor.
Errors will only be indicated acoustically if the acoustic signal has been
3
activated.
If, as listed in the table below, any of the indicators in the control panel
or the display panel are flashing or are illuminated, and/or if an acous-
tic signal can be heard, you can probably rectify the fault yourself.
Malfunction
One continuously repeated
warning tone can be heard,
the cycle indicator for the
selected cycle is flashing,
the end cycle indicator is
flashing once repeatedly:
There is no water running
into the dishwasher.
Possible cause
The tap is blocked or
furred with lime-scale
The tap is turned off.
The filter (where
present) in the
threaded hose fitting at
the water inlet valve is
blocked.
Filters in the base of
the washing compart-
ment are blocked.
The water inlet hose has
not been correctly laid.
Operating Instructions
Remedy
Clean tap
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
commenced dishwashing
cycle;
then abort the dishwashing
cycle (see chapter: Starting a
dishwashing cycle);
Clean out the filters. (See
chapter: Cleaning the filters)
Check hose installation.
33