Brother MFC-J435W Gelişmiş Kullanıcı Kılavuzu - Sayfa 27

Hepsi Bir Arada Yazıcı Brother MFC-J435W için çevrimiçi göz atın veya pdf Gelişmiş Kullanıcı Kılavuzu indirin. Brother MFC-J435W 47 sayfaları. Product safety guide - spanish
Ayrıca Brother MFC-J435W için: Manuel (12 sayfalar), Manuel (21 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar)

Brother MFC-J435W Gelişmiş Kullanıcı Kılavuzu
6

Printing reports

Fax reports

Use the Menu keys to set up the
Transmission Verification Report and the
Journal Period.
Transmission Verification
Report
You can use the Transmission Verification
Report as proof that you sent a fax.
(uuBasic User's Guide: Transmission
Verification Report)

Fax Journal (activity report)

You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or
24 hours, 2 or 7 days). If you set the interval
to Off, you can still print the report by
following the steps in How to print a report
uu page 24. The factory setting is
Every 50 Faxes.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Report Setting.
Press OK.
d
Press a or b to choose
Journal Period.
Press OK.
e
Press a or b to choose an interval.
Press OK.
6
If you choose Every 50 Faxes, go to
step h.
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory becomes full with
6
200 jobs before the time you chose
has passed, the machine will print
the Journal early and then erase all
jobs from the memory. If you want an
extra report before it is due to print,
you can print it without erasing the
jobs from the memory.
6
Every 50 Faxes
The machine will print the Journal
when the machine has stored
50 jobs.
f
Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
Note
When you set 12h Clock in the
Date&Time setting in Initial Setup,
enter the time in 12-hour format.
g
If you chose Every 7 Days in step e,
press a or b to display the days of the
week. Then choose the day you want to
be the first day of the 7-day countdown.
Press OK.
h
Press Stop/Exit.
6
6
23