A-I-R Atos VQ Kısa Açıklama - Sayfa 2

Hava Araçları A-I-R Atos VQ için çevrimiçi göz atın veya pdf Kısa Açıklama indirin. A-I-R Atos VQ 2 sayfaları.

22.)

Check the function of the flap and adjust it with about 15-20°to the keel for

take off.

23.)

Walk one time around the glider and check: All ribs are in position. Spoiler

rib is in position and tight. Hold the rib outside the spoiler rib with one hand

at the trailing edge and try to move the spoiler rib up, down left and right.

Have a look to the spoiler lever and routing of the spoiler rope and its

condition. For this check it is not necessary to open the Velcro.

24.)

Important: Open and close the Velcro between the two outer ribs if the

shape of the sail is not clean. Do not open other Velcro for set up or brake

down.

Brake down in opposite sequence

Important steps:

1.)

Detach spoiler cable (pic 28) before loosen the sail!

2.)

Fix spoiler at top of the D-spar. Don't bend the spoiler too much. Fix the

sail with the strap and ensure that: The Spoiler is on top and the tip tube is

fixed at the rear side of the sail.

3.)

Fix the inside of the flap with the strap to the lower side of the D-spar.

Loose, not tight.