Brother MFC-L3710CW Hızlı Kurulum Kılavuzu
Hepsi Bir Arada Yazıcı Brother MFC-L3710CW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-L3710CW 2 sayfaları. Brief explanations for routine operations
Ayrıca Brother MFC-L3710CW için: Referans Kılavuzu (21 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
HL-L3290CDW / DCP-L3551CDW / MFC-L3710CW /
MFC-L3750CDW / MFC-L3770CDW
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner Cartridge
(Black, Cyan, Magenta, and Yellow)
Watch our Video FAQs for
help with setting up your
Brother machine:
support.brother.com/videos.
1
Remove the packing materials and re-install the drum unit and toner cartridge assemblies
Remove all the blue packing tape.
Remove the orange part from each cartridge.
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Back
Connect the telephone line cord
5
(For MFC models)
If you do not plan to use the fax feature on this machine, go to step
Waste Toner Box*
Assemblies*
Telephone Line Cord
(For MFC models)
Brother Installation Disc
Quick Setup Guide
Slide all eight yellow drum locks.
x4
Front
.
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: support.brother.com/manuals.
* Already installed in the machine
Belt Unit*
AC Power Cord
Product Safety Guide
Reference Guide
Push firmly.
Adjust the paper
guides.
4
Select your language (if needed)
For LCD models
1.
Press Menu.
2.
Press ▲ or ▼ to display
[Initial Setup], and then press
OK.
3.
Press ▲ or ▼ to display
[Local Language], and then press
OK.
4.
Press ▲ or ▼ to select your language,
and then press OK.
5.
Press Stop/Exit.
Configure the machine for faxing (For MFC models)
6
If you do not plan to use the fax feature on this machine, go to step
NOTE:
• For more information on using the fax feature, see the Online User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User's Guide.
A. Set the date and time
Press
[Settings] > [All Settings] >
[Initial Setup] > [Date & Time], and
then set the date and time you want.
NOTE:
• Manuals in Spanish for this model are available on the Brother
Solutions Center. (USA only): support.brother.com/manuals
Los manuales en español de este modelo están disponibles
en el Brother Solutions Center. (Solamente en los Estados
Unidos): support.brother.com/manuals
• The components included in the box may differ depending on
your country.
• The available connection interfaces vary depending on the
model.
• Interface cables are not included. You must purchase the
correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 6 feet (2 meters) long.
Network cable (DCP-L3551CDW / MFC-L3750CDW /
MFC-L3770CDW)
Use a straight-through Category 5 (or greater) twisted-pair
cable.
• The illustrations in this Quick Setup Guide show the
MFC-L3770CDW.
BK
C
M
Y
Do not exceed this mark.
For Touchscreen models
1.
On the machine's touchscreen,
press
[All Settings] >
[Initial Setup] >
[Local Language].
2.
Press your language.
3.
Press
.
B. Set the Station ID
Press
[Settings] > [All Settings] >
[Initial Setup] > [Station ID], and then
set your fax or telephone number and your name.
D00WZ7001-00
USA/CAN
Version 0
[Settings] >
.