Brother Work Smart MFC-J650dw Hızlı Başlangıç Kılavuzu - Sayfa 5
Hepsi Bir Arada Yazıcı Brother Work Smart MFC-J650dw için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother Work Smart MFC-J650dw 45 sayfaları. Work smart series inkjet all-in-one
Ayrıca Brother Work Smart MFC-J650dw için: Hava Baskı Kılavuzu (12 sayfalar), Özellikler (2 sayfalar), Temel Kullanım Kılavuzu (14 sayfalar), SSS & Sorun Giderme (6 sayfalar)
Sayfayı Yazdır
e
Take care to match the sticker colour a with
the cartridge colour b as shown in the diagram
below.
Install each ink cartridge in the direction of the
arrow on the label.
f
Gently push the back of the ink cartridge
marked "PUSH" until the cartridge lever lifts.
After all the ink cartridges are installed, close
the ink cartridge cover.
NOTE
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
1
2
4
Load plain A4 paper
a
Pull the paper tray a completely out of the
machine.
b
Open the output paper tray cover a.
c
Gently press and slide the paper width
guides a and then the paper length guide b to
fit the paper size.
Make sure that the triangular marks c on the
paper width guides a and paper length
guide b line up with the mark for the paper size
you are using.
1
1
1
3
2
3
5