Fujitsu 9U13A1 Kullanıcı Kılavuzu - Sayfa 37

Dizüstü Bilgisayar Fujitsu 9U13A1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu 9U13A1 48 sayfaları.

Conﬁguring password protection in BIOS Setup Utility

Configuring password protection in BIOS Setup Utility

Before using the various options for password protection in the BIOS Setup utility

to increase data security, please observe the following:

Make a note of the passwords and keep them in a safe place. If you forget your

supervisor password you will not be able to access your notebook. Deletion of the

password is not covered by your warranty and a charge will be made for assistance.

Password protection

Your password can be up to 32 characters long and can contain

letters, numbers and special characters.

When using special characters, you must remember that these are dependent

on the country variants of the keyboard used.

If you change the Password Severity setting from Strong to Stringent in the Security

BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password.

In this case, the system can remain permanently unusable.

Therefore, Fujitsu recommends to generally set up a supervisor password

with the setting Password Severity = Strong.

Protecting BIOS Setup Utility (supervisor and user password)

If you have opened these operating instructions on the screen, we

If you have opened these operating instructions on the screen, we recommend that you

recommend that you print them out. You cannot call the instructions onto

print them out. You cannot call the instructions onto the screen while you are setting up

the screen while you are setting up the password.

the password.

BIOS SetupUtility

The supervisor password and the user password both prevent unauthorised use of the BIOS Setup

Utility. With the aid of the supervisor password you can access all of the functions of the BIOS

Utility . With the aid of the supervisor password you can access all of the functions of the BIOS

Setup Utility, while the user password will only give you access to some of the functions. You

Setup Utility , while the user password will only give you access to some of the functions. You can

can only set up a user password if a supervisor password has already been assigned.

only set up a user password if a supervisor password has already been assigned.

Please refer to section

of how to call up and operate the BIOS-Setup-Utility.

"Settings in BIOS Setup Utility", Page 59

Security functions

Using Your LIFEBOOK

for a description