AEG L 60260 TL Kullanıcı Kılavuzu - Sayfa 14
Yıkayıcı AEG L 60260 TL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 60260 TL 32 sayfaları.
Ayrıca AEG L 60260 TL için: Kullanıcı Kılavuzu (28 sayfalar)
Sayfayı Yazdır
14 www.aeg.com
SETTING AND STARTING A PROGRAMME
1.
Turn the programme knob.
2.
The indicator of button
with red colour.
3.
The indicators of the default tempera-
ture and spin speed come on. To
change the temperature and/or the
spin speed, press the related buttons.
4.
Set the available functions and the
delay start. When you press the rele-
vant button, the indicator of the set
function comes on or the display
shows the related symbol.
5.
Press button
gramme. The indicator of button
is on with red colour.
INTERRUPT A PROGRAMME
1.
Press button
es.
2.
Press button
programme continues.
CANCEL A PROGRAMME
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1.
Press button
es.
2.
Change the function set.
SET THE DELAY START
1.
Press button
the display shows the number of mi-
nutes or hours.
2.
Press button
the countdown of the delay start.
flashes
4
4
to start the pro-
. The indicator flash-
4
again. The washing
4
to cancel the pro-
1
again to activate the
1
4
. The indicator flash-
5
again and again until
4
, the appliance starts
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can cancel
or change the set of the delay
start.
You cannot set the delay start with
the Steam programme.
CANCEL THE DELAY START
1.
Press button
tor flashes.
2.
4
Press button
the display shows 0'.
3.
Press button
starts.
OPEN THE LID
While a programme or the delay start op-
erates, the lid is locked.
To open the lid:
1.
Press button
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2.
Open the lid.
3.
Close the lid and press button
The programme or the delay start
continues.
If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the lid . If neces-
sary, do the following procedure
to open the lid.
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that there is no wa-
ter in the drum.
If you deactivate the appliance, it
is necessary to set the programme
again.
4
to
4
. The related indica-
5
again and again until
4
. The programme
4
. You can open the
4
.