Brother P-touch H500 Hızlı Kurulum Kılavuzu - Sayfa 12

Etiket makinesi Brother P-touch H500 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother P-touch H500 36 sayfaları.

INTRODUCTION

Rechargeable Li-ion battery

• At the time of purchase, the rechargeable Li-ion battery is slightly charged so that the

operation of the P-touch can be verified; however, the rechargeable Li-ion battery should

be fully charged with the AC adapter before the P-touch is used.

• If the P-touch will not be used for a long period of time, remove the rechargeable Li-ion

battery from the P-touch, and then store it in a location where it is not exposed to static

electricity, high humidity, or high temperatures (temperatures between 15

and 40% to 60% humidity are recommended). In order to maintain the efficiency and life

of the Li-ion rechargeable battery, charge it at least every six months.

• If there is anything unusual about the Li-ion rechargeable battery the first time it is used,

for example, if it appears rusted or if it overheats, do not use the Li-ion rechargeable

battery. Contact the retail outlet where the P-touch was purchased.

P-touch

• DO NOT install P-touch near any device that will cause electromagnetic interference.

P-touch may malfunction if left near a television, radio, etc.

• DO NOT use the P-touch in any way or for any purpose not described in this guide. Doing

so may result in injury or damage the P-touch.

• DO NOT put any foreign objects into the tape exit slot, AC adapter connector, or any other

part of the P-touch.

• DO NOT touch the print head (refer to page 8) with your fingers. Use the optional print

head cleaning cassette (TZe-CL4), the self-cleaning function of the P-touch, or a soft wipe

(e.g. a cotton swab) when cleaning the print head (refer to "Cleaning the Unit" in the

User's Guide.).

• DO NOT clean any part of the P-touch with alcohol or other organic solvents. Only use a

soft, dry cloth.

• DO NOT place the P-touch in direct sunlight, near heaters or other hot appliances, or in

any location exposed to extremely high or low temperatures, high humidity, or dust. The

standard operating temperature range of the P-touch is 10

• DO NOT leave any rubber or vinyl, or products made of rubber or vinyl, on the P-touch

for an extended period of time, otherwise the P-touch may become marked.

• Depending on the environmental conditions and the applied settings, some characters or

symbols may be difficult to read.

• Use Brother TZe tapes with P-touch.

• DO NOT pull or apply pressure to the tape in the cassette. Otherwise the tape cassette

or P-touch may be damaged.

• DO NOT try to print labels using an empty tape cassette or without a tape cassette in the

P-touch. Doing so will damage the print head.

• DO NOT attempt to cut the tape while printing or feeding since this will damage the tape.

• Depending on the location, material, and environmental conditions, the label may unpeel

or become irremovable, and the colour of the label may change or be transferred to other

objects.

General Precautions

C and 25

C to 35