AEG L 7347 FL Kullanıcı Kılavuzu - Sayfa 22

Yıkayıcı AEG L 7347 FL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 7347 FL 28 sayfaları.

Sayfayı Yazdır

22 www.aeg.com

Problem

The appliance does

not drain the water.

The spin phase does

not operate or the

washing cycle lasts

longer than usually.

There is water on the

floor.

You cannot open the

appliance door.

The appliance makes

an unusual noise.

Possible solution

Make sure that the filter of the inlet hose and the filter

of the valve are not clogged. Refer to "Care and clean-

ing".

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose

is correct.

Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

Make sure that the drain filter is not clogged. Clean the

filter, if necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is cor-

rect.

Set the drain programme if you set a programme with-

out drain phase.

Set the drain programme if you set an option which

ends with water in the tub.

Set the spin programme.

Make sure that the drain filter is not clogged. Clean the

filter, if necessary. Refer to 'Care and cleaning'.

Adjust manually the items in the tub and start the spin

phase again. This problem may be caused by balance

problems.

Make sure that the couplings of the water hoses are

tight and there is not water leakages.

Make sure that the drain hose have no damages.

Make sure you use the correct detergent and the cor-

rect quantity of it.

Make sure that the washing programme is finished.

Set the drain or the spin programme if there is water in

the drum.

Make sure the levelling of the appliance is correct. Re-

fer to 'Installation'.

Make sure that the packaging and/or the transit bolts

are removed. Refer to 'Installation'.

Add more laundry in the drum. The load may be too

small.