Fujitsu primergy h250 Kullanıcı Kılavuzu - Sayfa 13

Sunucu Fujitsu primergy h250 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu primergy h250 19 sayfaları.

5. Note about Error / Message Log

On rare occasions while the PRIMERGY H250 is running, FAN error may be logged in the

"Error and Message Log" and OS Event Logs. If this happens, check the interval between the

error detection and recovery timestamps. If recovery occurred within seconds, then there is no

cause for alarm and operation may be safely continued.

[Example]

ERROR LOG:

0XX [0400] ! 02.07.2002 08:01:45 Fan N in cabinet 0 is not working

0XX [0401] I 02.07.2002 08:01:50 Fan N in cabinet 0 is working again

XX: Log Number

N：FAN Number(0,1,2,3)

6. Note for using Remote Control Service / LAN or Telnet

The display on the screen might fall into disorder as follows when connecting with the Remote

Service Controller by using RemoteControlService/LAN or Telnet. As for this, a part of the

display has only been fallen into disorder. There is no functional problem.

1. Logon screen

The first logon might fail. Please input user name/password again.

***************************************

* Welcome to PRIMERGY Remote Manager *

Firmware Revision 0.3.1.81

* Firmware built jun 21 2002 10:21:56 *

***************************************

System Type : PRIMERGY H250System ID : H250_00056

System Name : H250NT4

Please enter user name : art POST)

2. Main menu screen

'(1) Console Redirection' menu is concealed under 'Power Status'.

This menu can be selected during POST and MS-DOS.

***************************************

* Welcome to PRIMERGY Remote Manager *

Firmware Revision 0.3.1.81

* Firmware built jun 21 2002 10:21:56 *

***************************************

System Type : PRIMERGY H250System ID : H250_00056

System Name : H250NT4

Power Status: Off

(2)Console History

(3)Remote Maintenance...

(c)Change password

Enter selection or (0) to quit:

- 13 -