Fujitsu M3093GX Operatör El Kitabı - Sayfa 32

Tarayıcı Fujitsu M3093GX için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Fujitsu M3093GX 50 sayfaları. Departmental document scanner
Ayrıca Fujitsu M3093GX için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Temizlik Talimatları Kılavuzu (12 sayfalar), Kurulum Prosedürü (5 sayfalar)

Sayfayı Yazdır
Fujitsu M3093GX Operatör El Kitabı

5.3.2 Cleaning the ADF

Clean the automatic document feeder (ADF) once every 5,000 pages.
The cycle depends on the types of documents used (paper quality, a
level of toner fusing on paper).
1
2
3
ADF lever
Pad
Automatic document feeder
Sheet guide (white part)
Pull the ADF lever up to open the ADF.
Use the dry cloth or a cloth with ethyl alcohol to softly remove
dirt and dust as follows.
Pad:
Wipe the pad in a downward direction (indi-
cated by the arrow). Be careful not to hook
the pick spring when wiping.
Glass:
Wipe the glass lightly.
Pick roller :
Wipe the roller softly. Be careful not to
damage the surface of the roller.
Feed roller and coupled feed roller:
Wipe the rollers softly. Be careful not to
damage the surface of the rollers.
Ejection roller and coupled ejection roller:
Wipe the rollers softly. Be careful not to
damage the surface of the rollers.
Sheet guide (white part):
Wipe the sheet guide softly.
Close the ADF to lock the ADF lever.
Feed roller
Pick spring
Figure 5.3

Cleaning the ADF

Ejection roller (Clean the roller
on the opposite side also.)
Pick rollers
Coupled feed roller
Glass
5 – 3