Fujitsu ETERNUS4000 500 Manuel - Sayfa 12

Depolama Fujitsu ETERNUS4000 500 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu ETERNUS4000 500 28 sayfaları. Disk storage systems (fibre channel) for oracle solaris
Ayrıca Fujitsu ETERNUS4000 500 için: Manuel (21 sayfalar), Sunucu Bağlantı Kılavuzu (25 sayfalar), Sunucu Bağlantı Kılavuzu (32 sayfalar), Bağlantı Kılavuzu (19 sayfalar)

Sayfayı Yazdır

Chapter 4

The server information registered in the ETERNUS Disk storage system should be checked.

A variety of commands are used to check the following server information.

•

iSCSI Software Initiator

Since iSCSI Software Initiator is provided with the OS, installation is not required.

Check the SUNWiscsiu and SUNWiscsir packages using the "pkginfo" command.

•

iSCSI Initiator name

Execute the following command:

The iSCSI Initiator name is displayed in the "Initiator node name" column.

•

Server-side LAN card IP address for connecting to the ETERNUS Disk storage system

Execute the following command:

Set this IP address if it is not already set.

•

Initiator CHAP Name

The Initiator CHAP Name is the user name for unidirectional CHAP authentication, and is not

required if CHAP authentication is not used.

Execute the following command:

The Initiator CHAP Name is displayed in the "CHAP Name" column of the applicable target

information.

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Checking the Server Information

# iscsiadm list initiator-node

# ifconfig -a

# iscsiadm list initiator-node