Brother MFC-J415W Gelişmiş Kullanıcı Kılavuzu - Sayfa 26
Yazdırma Sunucusu Brother MFC-J415W için çevrimiçi göz atın veya pdf Gelişmiş Kullanıcı Kılavuzu indirin. Brother MFC-J415W 50 sayfaları. Quick setup guide - spanish
Ayrıca Brother MFC-J415W için: Kurulum Kılavuzu (35 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (33 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (35 sayfalar)
Sayfayı Yazdır
7
Making copies
Copy settings
You can change the copy settings temporarily
for multiple copies.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 3.)
To change a setting, press COPY and then
press a or b to scroll through the copy
settings. When the setting you want is
highlighted, press OK.
When you are finished choosing settings,
press Mono Start or Colour Start.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 24.)
Stop copying
To stop copying, press Stop/Exit.
20
Changing copy speed and
7
quality
You can choose from a range of speed and
quality. The factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Press
b
Load your document.
7
c
Enter the number of copies you want.
d
Press a or b to choose Quality.
Press OK.
e
Press a or b to choose Fast, Normal or
Best.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
7
7