Fujitsu SK-96390-100PMC Kullanıcı Kılavuzu - Sayfa 9

Anakart Fujitsu SK-96390-100PMC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu SK-96390-100PMC 32 sayfaları. Mb96300 series

SK-96390-100PMC User Guide

Overview

0.3.8 I2C Bus

Additional 10 kOhm pull-up resistors can be connected to the I²C bus lines by setting the

according jumpers. JP46 is for SDA0 and JP47 for SCL0.

0.3.9 Emulator System

If the board is used as an emulator target board, the microcontroller must be removed from

the socket and the corresponding probe cable has to be mounted:

Series

V-Chip

Probe cable

Socket

NQPACK100SD-ND

MB2198-510-E

MB96390

MB96V300B

HQPACK100SD

Table 0-1: Emulation System

- 9 -

UG-960017-11