Indesit DFP 58T94 Kullanım Talimatları Kılavuzu - Sayfa 5
Bulaşık Makinesi Indesit DFP 58T94 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit DFP 58T94 16 sayfaları.
Ayrıca Indesit DFP 58T94 için: Kullanım Talimatları Kılavuzu (32 sayfalar)
Sayfayı YazdırAdvice regarding the first wash cycle
After the installation, remove the stoppers from the racks and
the retaining elastic elements from the upper rack (if any).
Water softener settings
Before starting the first wash cycle, set the hardness lev-
el of
the water from the mains supply. (see chapter Rinse
aid and refined salt).
First load the softener tank with water, then introduce about
1 kg of salt. It is perfectly normal for water to flow out.
As soon as this procedure is complete, run a wash cycle.
Only use salt that has been specifically designed for dish-
washers.
After the salt has been poured into the machine, the LOW
*
SALT indicator light
switches off.
If the salt container is not filled, the water softener and
the heating element may be damaged as a result.
*
Only available in selected models.
The machine has a buzzer/set of tones
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
(depending on the dishwasher model)
light
Technical data
width 60 cm
Dimensions
height 85 cm
depth 60 cm
Capacity
13 standard place-settings
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
Water supply pressure
7,25 psi – 145 psi
Power supply voltage
See appliance data plate
Total absorbed power
See appliance data plate
Fuse
See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/CE Waste Electrical
and Electronic Equipment (WEEE)
(depending on the
GB
.
5