Indesit IDL 420 Kurulum ve Kullanım Kılavuzu - Sayfa 17

Bulaşık Makinesi Indesit IDL 420 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Indesit IDL 420 25 sayfaları.

Sayfayı Yazdır

Indesit IDL 420 Kurulum ve Kullanım Kılavuzu

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove

the larger food particles to prevent the filter from

becoming clogged, which results in reduced performan-

ce.

If the pots and pans have baked-on food that is

extremely hard to remove, we recommend that they be

allowed to soak before they are washed. This will elimi-

nate the need for extra wash cycles.

Pull out the racks to facilitate loading the dishwasher.

How to Use the Lower Rack

We recommend that you place the most difficult to clean

items on the bottom rack: pots, pans, lids, serving

dishes and bowls, as shown in the figure to the right.

It is preferable to place serving dishes and lids on the

sides of the racks in order to avoid blocking the rotation

of the top spray arm.

- Pots, serving bowls, etc. must always be placed top

down.

- Deep pots should be slanted to allow the water to flow

out.

Insert the cutlery into the basket: Knives and other

utensils with sharp edges must be placed in the cutlery

basket with the points facing downwards, or they must

be positioned horizontally in the tip-up compartments

on the upper rack. Position all cutlery items so that they

don't touch.

If the rack has side baskets, the spoons should be

loaded individually into the appropriate slots (see fig.

A).

- Especially long utensils should be placed in the

horizontal position at the front of the upper rack.

How to Use the Upper Rack

The upper rack is designed to hold more delicate

and lighter dishware, such as glasses, coffee and tea

cups and saucers, as well as plates, small bowls and

shallow pans (as long as they are not too dirty).

- Position the dishes and cookware so that they do

not get moved by the spray of water.

How to adjust the Upper rack ...

The top rack can be adjusted using the two rack heights

(top and bottom). To adjust the rack, open up the tabs

that lock the guides and pull out the rack. Arrange the

rack with the back wheels in either the top or bottom

position and then insert it along the guides until the

front wheels are on as well. Close the tabs to lock the

rack in place (see Fig. F).

The height of the upper rack should ideally be

adjusted WHEN THE RACK IS EMPTY.

Never lift or lower the rack on one side only.

Loading examples for the upper rack

Loading examples for the lower rack

Fig. A

)

Fig. F