Indesit LFT 321 HXUK Servis Kılavuzu - Sayfa 6

Bulaşık Makinesi Indesit LFT 321 HXUK için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Indesit LFT 321 HXUK 26 sayfaları.

DISCHARGING PIPE CONNECTION
Standhose
Ensure that the flexible discharging-pipe has not been introduced too deep inside the standhose. Should the discharging-pipe be
equipped with "support-flaps", ensure that they too be completely introduced into the standhose.
Above illustration: Recommended height of the standhose 500m (20")
This will prevent the hose from tipping-over during setting-up and use.
Donot place the standhose near to electric-sockets and ENSURE that it is uncoiled and is placed in the direction as shown in the
illstration above.
The standhose must be provided with a hole measuring at least 38mm (1 1/2"). It must be set up as illustrated above, be
provided with a syphon and must discharge into the discharging plumbing system. However, it MUST NOT be connected to the
discharging-hose connections of the water-basin.
FILLING UP BASIN SYSTEM
Regarding discharging plumbing-system under the basin:
Before connecting the flexible discharging-hose, it is recommended to get rid off any internal residuals in the hose which could
ILLUSTRATION: Tap-height 600mm min.
Secure discharge-hose using a Jubillee-type clip.
Service Manual
Manual LFT 228-320 - 321
give rise to hose blockages.
Edition
2007.10.15
6
Language
English