AEG S53620CTXF Kullanıcı Kılavuzu - Sayfa 20

Dondurucu AEG S53620CTXF için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG S53620CTXF 44 sayfaları.
Ayrıca AEG S53620CTXF için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

www.aeg.com

Problem

Temperature cannot be set. The FROSTMATIC or

The temperature in the ap-

pliance is too low/too high.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

6.2 Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

7. INSTALLATION

WARNING!

Refer to Safety chapters.

7.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Possible cause

COOLMATIC function is

switched on.

The temperature regulator

is not set correctly.

The food products' temper-

ature is too high.

Many food products are

stored at the same time.

The FROSTMATIC function

is switched on.

Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

Solution

Switch off FROSTMATIC or

COOLMATIC manually, or wait

until the function resets auto-

matically to set the tempera-

ture. Refer to "FROSTMATIC

or COOLMATIC function".

Set a higher/lower tempera-

ture.

Let the food products temper-

ature decrease to room tem-

perature before storage.

Store less food products at the

same time.

Refer to "FROSTMATIC func-

tion".

Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

Climate

Ambient temperature

class

+16°C to + 43°C

7.2 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.