Kohler VEIL HT200 PNE IWT Kurulum Talimatları Kılavuzu - Sayfa 19

Sıhhi Tesisat Ürünleri Kohler VEIL HT200 PNE IWT için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Kohler VEIL HT200 PNE IWT 30 sayfaları. Wall-hung toilet

Sayfayı Yazdır

3. Install the big and small leak-proof gaskets on inlet pipe

and outlet pipe ,then install it to corresponding pipes on the

toilet tank.

4. 48mm-58mm of the long screw shall be reserved outside

the wall as shown in the illustration. if the long screw

outside the wall is not long enough or much longer than

that needed, it should be adjusted with screwdriver or by

hand. Then apply lubricant to drainage pipe and limber

pipe to ensure a smooth installation.

5. Install the toilet as shown in the illustration, and use a spirit

level to ensure the lavatory to remain level.

6. Install the reserved lock, gasket, hexagonal nut and

decoration cap onto long screw according to the order

shown in the illustration.

Note:

Please refer to the installation instructions of toilet.

1402749-T01-A

Small Leak-proof Gasket

48mm-58mm

Reversed Lock

Hexagonal Nut

-12-

Inlet Pipe

Drainage Pipe

Big Leak-proof Gasket

48mm-58mm

Lubricant

Long Screw

Gasket

Decoration Cap

Long Screw

Spirit Level