Kohler AVANTIS K-4761T-CP-F10 Kurulum Talimatları - Sayfa 2

Banyo Armatürleri Kohler AVANTIS K-4761T-CP-F10 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Kohler AVANTIS K-4761T-CP-F10 3 sayfaları. Quiet-close elongated toilet seat with quick-release functionality

Sayfayı Yazdır

INSTALLATION

Install the Toilet Seat

Remove the existing toilet seat and

mounting hardware.

If necessary, clean the toilet surface.

Position the mounting bracket with

flat side up and align the holes to the

toilet seat mounting holes.

Insert the bolts through the mounting

bracket and the toilet seat mounting

holes.

Thread a nut onto each bolt.

Using a screwdriver and an

adjustable wrench, tighten the nuts.

Do not overtighten.

If the toilet is pre-drilled with a screw

hole, just turn the screw into the

screw hole and leave the nut aside.

Position the toilet seat over the bowl

and slide the toilet seat hinge plate

onto the mounting bracket. Press

firmly into place.

Insert the hinge cover tabs into the

hinge slots.

Press the hinge cover down until it

snaps into place over the mounting

bracket.

Verify the seat is securely fastened.

Make any adjustments as needed.

OPERATION

Your Kohler toilet seat is designed to

close slowly when the lid is dropped.

To close the seat, simply flip the lid

forward.

The toilet seat also has an easy-to-

clean quick-release hinge that allows

the toilet seat to be quickly removed

for complete cleaning.

The hinge covers are easily lifted using

a fingertip. If room is tight, push the

toilet seat back to ease the hinge

cover operation.

Once the hinge covers are lifted, pull

the toilet seat forward leaving the

mounting hardware in place.

After cleaning, simply push the toilet

seat back into place on the mounting

hardware and close the hinge covers.

1092300-T01-D

Tabs

Hinge Cover

Bolt

Nut

Mounting Bracket

Nut

Fig. #1

Fig. #2

Hinge Slots

Seat

Hinge Plate