AEG LAVATHERM 57810 Kullanıcı Bilgileri - Sayfa 18

Kurutucu AEG LAVATHERM 57810 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG LAVATHERM 57810 32 sayfaları. Condensation dryer
Ayrıca AEG LAVATHERM 57810 için: Kullanıcı Bilgileri (32 sayfalar)

Sayfayı Yazdır

Emptying the condensate tank

Empty condensate tank after every drying cycle.

If the condensate tank is full, an active programme will break off auto-

matically and the EMPTY WATER (RESERVOIR) display will light up. In

order to continue the programme, the condensate tank must first be

emptied.

Warning! The condensate is not suitable for drinking or for preparing

foodstuffs.

1. Take out drawer containing con-

densed water container

completely (1) and pull up the con-

densed water container's drainage

pipe as far as it will go (2).

2. Pour condensed water out into a

basin or similar receptacle.

3. Slide outlet connections in and re-

fit condensate tank.

If the programme has been inter-

rupted as a result of the conden-

sate tank being full:

Press the START/PAUSE (START/

PAUZE) button to continue the

drying cycle.

The condensate tank has a volume of approx. 4 litres. This is sufficient

for around 6kg of laundry which has previously been spun at 800 revo-

lutions/minute.

The condensate can be used as distilled water, e.g. for steam ironing.

However first filter the condensate (e.g. with a coffee filter) to remove

any residue and small pieces of fluff.

Cleaning heat exchanger

If the HEAT EXCHANGER (WARMTEWISSELAAR) display is illuminated,

the heat exchanger needs to be cleaned.

Caution! Operating when the heat exchanger is clogged with lint can

damage the dryer. This also increases energy consumption.