Kohler K582 Kullanıcı El Kitabı - Sayfa 13

Motor Kohler K582 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Kohler K582 17 sayfaları. Four-cycle, twin cylinder, air-cooled engine

Sayfayı Yazdır

Parts Ordering

The engine Specification,

Model, and Serial Numbers

are required when ordering replacement

parts from

your Kohler Engine Service Dealer. These numbers

are found on the identification

plate which is affixed to

the engine shrouding.

Include letter suffixes if there

are any. See "Engine Identification

Numbers" on

page 5.

Always insist on genuine Kohlerparts.

All genuine

Kohler parts meet strict standards

for fit, reliability,

and performance.

Major Repair

Major repair information

is available

in Kohler Engine

Service Manuals.

However, major repair generally

requires the attention of a trained mechanic and the

use of special tools and equipment.

Your Kohler

Engine Service Dealer has the facilities,

training,

and

genuine Kohler replacement

parts necessary to

perform this service. For Sales & Service assistance

call I-800-544-2444

(U.S. & Canada) or contact your

Kohler Engine Dealer or Service Distributor,

he's in

the Yellow Pages under Engines-Gasoline.

Model Designation

Model K582S for example:

K indicates

K-Series,

58 indicates the approximate

cubic inch displacement,

2 indicates the number of cylinders.

Letter suffixes

following the model numbers designates

a specific

version, as follows:

Suffix

Designates

Generator

Set

Quiet Model

Electric Start

Specifications

Model: ...................................................................................................................................

K582

Bore: .................................................

inches (millimeters)

...................................................

3.50 (88.9)

Stroke- ................................................

inches (millimeters)

...................................................

3.00 (76.2)

Displacement:

.............. cubic inches (cubic centimeters)

...................................................

57.7 (946)

Power (@3600 RPM): ................. horsepower

(kilowatts) ...................................................

23 (17.1)

Weight* .....................................................

Ibs. (kilograms) ...................................................

187 (85.0)

Oil Capacity:

.........................................

U.S. pints (liters) ...................................................

8 (3.8)'

Spark Plug Gap: ...............................

inches (millimeters)

...................................................

0.025 (0.65)*

Spark Plug Size: .............................................

millimeters

...................................................

Spark Plug Type: ..................................................................................................................

Champion

RHI 0 or equivalent

Breaker Point Gap (Nominal) ........... inches (millimeters)

...................................................

0.020 (0.508)3

IAn additional

pint (0.5 L) required when oil filter is changed. For best results, fill to 'IF" mark on dipstick as opposed to

adding a given quantity of oil.

*Gaseous fueled engines - gap .018 in. (0.45 mm).

3After setting point gap

start engine and check timing using a timing light

adjust governor

accordingly.