Kohler Memoirs 486T Kurulum Talimatları - Sayfa 4

İç Mekan Mobilyaları Kohler Memoirs 486T için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Kohler Memoirs 486T 4 sayfaları. Accessory

Sayfayı Yazdır

How To Install The Bonnet

Position the escutcheon(4), if included, onto the bonnet(6).

Slide the bonnet onto the bracket(2). Orient the setscrew hole of the bonnet

downward. Make sure the bonnet pin(5) engage the indexing hole in the back

of the escutcheon, if applicable. Insert a screw(7) into the bonnet and tighten.

NOTE: Make sure the bonnet pin engage into the escutcheon hole.

How To Install The Towel Bar

Slide the shaft of the cylinder head(11)(12) of the towel bar kit(10) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the towel bar kit.

How To Install The Towel Ring

Slide the shaft of the cylinder head(14) of the towel ring kit(13) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the towel ring kit.

How To Install The Glass Shelf

Slide the shaft of the cylinder head(16)(17) of the shelf kit(15)(21) into the

bonnet(6), ensure the brackets are horizontal and two cylinder heads with the

detent facing downward. Tighten the screw(8) into the bonnet with the hex

wrench(9) to secure the shelf kit.

Slide the shelf(19) through the slot on the bracket. Ensure the shelf is in the

center of the slot on the bracket and horizontal. Tighten the setscrew(18) with

the hex wrench(9).

How To Install The TP Holder

Slide the shaft of the cylinder head(22) of the tissue holder kit(24) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the tissue holder kit.

Disassemble the tissue spindle(23) from the tissue holder kit(24) as required,

insert roll paper and assemble it back to the tissue holder kit.

How To Install The Robe Hook

Slide the shaft of the cylinder head(26) of the robe hook kit(25) into the bonnet(6),

orient the cylinder head with the detent facing downward. Tighten the screw(8)

into the bonnet with the hex wrench(9) to secure the robe hook kit.

How To Install The Dual TP Holder

Slide the shaft of the cylinder head of the tissue holder kit(27)(28)(29) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the dual tissue holder

kit. Disassemble the tissue spindle(23) from the tissue holder kit as required,

insert roll paper and assemble it back to the dual tissue holder kit.

1243009-2A-A

How To Install The Soap Dish

Slide the shaft of the cylinder head(32) of the soap dish kit(30) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the soap dish kit.

Insert the dish(31).

How To Install The Covered Toilet Paper Holder

Slide the shaft of the cylinder head(33) of the toilet paper holder kit(34) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the toilet paper holder

kit.

How To Install The Double Towel Shelf

Slide the shaft of the cylinder head(35) of the double towel shelf kit(36) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the double towel shelf

kit.

How To Install The Toilet Brush Holder

Slide the shaft of the cylinder head(39) of the toilet brush holder kit(38) into the

bonnet(6), orient the cylinder head with the detent facing downward. Tighten the

screw(8) into the bonnet with the hex wrench(9) to secure the toilet brush holder

kit.

Slide the glass holder(40) into the toilet brush holder, then slide the brush (37)

into the glass holder. If necessary, disassemble brush from the toilet brush

holder, then reinstall the brush to the brush holder.

How To Install The Double Towel Bar

Slide the shaft of the cylinder head(42)(43) of the double towel bar kit(41) into

the bonnet(6), orient the cylinder head with the detent facing downward. Tighten

the screw(8) into the bonnet with the hex wrench(9) to secure the double towel

bar kit.

INSTALLATION CHECKOUT

Ensure that all connections are tightened.

Ensure all setscrews face straight down.

CLEANING INSTRUCTIONS

1243009-2A-A