A. Mallios Pamal WP Hızlı Başlangıç Kılavuzu - Sayfa 2

Fener A. Mallios Pamal WP için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. A. Mallios Pamal WP 2 sayfaları.

Remove the diffusor Place simultaneously 2 flat blade screwdrivers and pull up gently the

reflector.

Install the included plastic cover in to the unused hole and install the base plastic (with the

included mounting screws and plugs).

Instal the cable gland and pass the round cable thru.

Place the battery's connector to the corresponding connector on the P.C.B

Connect the mains as shown in figure

Install the included tie (if needed) to fasten securely the power cables.

Refit the reflector and fasten the two small screws (included).

Finaly place the diffusor by using the 4 included screws (tightening torque 1.2Nm)

230V AC

Figure1

Mains connection

TEST procedure with extra care!!

8 Unfasten the mounting screws step

by the mains press on the marking for TEST as shown in the picture below. Mount the diffusor by

using the 4 removed screws

INSTALLATION INSTRUCTIONS

(

and remove the diffusor When the luminaire is supplied