Aqua Exclusive C-30 PRO Kullanıcı El Kitabı - Sayfa 17

Su Filtrasyon Sistemleri Aqua Exclusive C-30 PRO için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Aqua Exclusive C-30 PRO 20 sayfaları. Drum filter
Ayrıca Aqua Exclusive C-30 PRO için: Kullanıcı El Kitabı (18 sayfalar)

Sayfayı Yazdır

Controlbox

1. Connect the plugs of the devices to the appropriate sockets on the control box, see figure
12.
2. Insert the power plug of the control box (5) in the appropriate socket and switch on the
system by toggling the switch (9).
3. Hold the button (1) for ten seconds to activate the motor and high pressure pump.
4. After about 20 to 30 minutes the rinse cycle should be repeated automatically.
5. For longer delays, you can adjust the height of the float, see figure 6.
Please note: Immediately after the filter is installed/used, the rinse cycle may be very short
and will increase in length as the contamination/floating debris decreases, up to a cycle of 20
to 30 min.
Warning: when adjusting the float the power supply must always be switched off.
Figure 10: Controlbox
1.
Manually Rinsing Button
2.
UV-C Power Socket
3.
Rinse Pump Power Socket
4.
Fuse 1
5.
Controlbox Power Plug
Installation
Controlbox
6.
Water Pump Power Socket
7.
Drum Motor Power Socket
8.
Fuse 2
9.
Controlbox ON/OFF Switch
10.
DMX connector water level sensor
Aqua Exclusive
15