Aqua Medic T controller CC Kullanım Kılavuzu - Sayfa 5
Kontrolör Aqua Medic T controller CC için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aqua Medic T controller CC 12 sayfaları.
Ayrıca Aqua Medic T controller CC için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (10 sayfalar)
Sayfayı Yazdır
1. Product Description
The Aqua Medic Temperature Controller T 2001 CC is generally delivered with a saltwater-resistant
temperature sensor. The unit is ready for connection.
2. Cooling Unit
The Temperature Controller can be connected to a cooling aggregate or another cooling unit (i. e.
fan, chilled water supply). The maximum output amounts to approx. 600 Watt.
3. Description of the front panel
1. Display
2. Control light
3. Measurement adjustment knob
4. Set-knob for adjustment
5. Temperature sensor for adjustment
6. Power plug
4. Installation
-
Connect to 220 V power source.
-
Set the switch (3) to „T" (display of temperature).
-
Place the temperature sensor into the aquarium and fix it with an Aqua Medic electrode holder.
After a few minutes, the actual temperature of aquarium water is indicated.
5. Adjusting nominal values
-
Put switch 3 to „Set" to adjust the desired value. To change the value, use the „Set" knob (4).
-
Set switch 3 back to „T". The unit is now ready for use.
-
As soon as the temperature value exceeds the adjusted value, the unit activates the power plug
(6) and switches on the consumer (cooler).
5