Aqua Medic Refill System easy Kullanım Kılavuzu - Sayfa 5
Kontrol Ünitesi Aqua Medic Refill System easy için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aqua Medic Refill System easy 10 sayfaları.
Ayrıca Aqua Medic Refill System easy için: Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
5. Set-up directions
1. Install the probe at low water level in the aquarium or filter.
2. Always plug in the power supply first, then connect the pump.
3. The system will automatically add water to the high level sensing point.
4. Let the water level below the low level sensing point to see if the system will automatically top up the water.
Notice
If you quickly lower the water level or pick up the probe during the test, residual water droplets may stay on
the probe. As long as the probe will be cleaned, it will return to normal. The surface of the probe and the
protective box have to be cleaned regularly as soiling will lead to incorrect filling.
6. Initialization
Because the system will calculate the appropriate amount of water according to the size of the aquarium and
generate the protection time when the aquarium is replaced, the initialization operation should be carried out
according to the above steps, otherwise errors may occur.
7. Failures
In case of failures and operational errors such as water shortage in the reservoir, water supply exceeding 1 cm,
the system will stop and the alarm will be set off with a flashing light. You can replug the power supply and the
device will restart so the system can resume normal operation.
8. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 05/2019
5