AVPro Edge ConferX AC-CXMF62-AUHD Hızlı Başlangıç Kılavuzu - Sayfa 3

Matris Anahtarlayıcı AVPro Edge ConferX AC-CXMF62-AUHD için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVPro Edge ConferX AC-CXMF62-AUHD 6 sayfaları. 6 input, 2 output multi-format classroom/conference room matrix switcher

Sayfayı Yazdır

Video Scaler Mode

• This will set the scaler mode for OUTPUT 1, the options are:

• BP = Bypass - Scaler is disabled (Default)

• 4K-2K = 1080P - If incoming signal is 4K, it will be downscaled to 1080P or 1900x1200 depending on the

input format.

Audio Status

• Enable or Disable extracted Audio, the options are:

• ON = Extracted audio ports are ON (Default)

• OFF= Extracted audio ports are muted.

Audio Binding

• Bind the audio to a specific OUTPUT. The audio will always follow one output, this

• means the audio switches with the video of the output you designate, the options are:

• OUT1 = Extracted audio will follow HDBT OUTPUT (Default)

• OUT 2= Extracted audio will follow HDMI OUTPUT

Test Pattern

• Generate a 1080p test pattern to a specific OUTPUT.

• OUT1 = Generate a test pattern on HDBT OUTPUT

• OUT 2= Generate a test pattern on HDMI OUTPUT

IR Control

• For IR Control there is an IR Window on the front face of the device

RS-232 control:

In order to connect your computer to the swtich by RS-232 you need to make your own cable with one end a

phoenix connector and the other end a RS-232 port. Your computer doesn't have a RS-232 input, get a USB

converter (as shown below), and plug the USB end into any computer.

RS232 can be extended over HDBT as well. Use the HDBT 3 Pin Phoenix to broadcast directly to your HDBT Input/

Output.