AVR Cinema Mirror HC 37.53 Kurulum İçin Talimatlar ve İpuçları - Sayfa 2

Projektör Aksesuarları AVR Cinema Mirror HC 37.53 için çevrimiçi göz atın veya pdf Kurulum İçin Talimatlar ve İpuçları indirin. AVR Cinema Mirror HC 37.53 9 sayfaları.

Sayfayı Yazdır

INSTRUCTIONS AND TIPS FOR THE INSTALLATION

OF THE HC 37.53 MODEL CINEMA MIRROR

GENERAL RECOMMENDATIONS FOR ASSEMBLY AND INSTALLATION

BEFORE USING FOR

T H E

F I R S T

Before proceeding to the installation and

manipulation, read carefully this manual and

follow conscientiously all the warnings and

cautions that are described.

GENERAL RULES

The equipment should be installed by

installers specialized in public locations. Install

and protect the line in accordance with the

low-tension electrical technical regulations,

as well as the MIE-BET-025 complementary

technical instructions, "Installations in

locations of public concurrence" . The

equipment should be connected to ground

protection.

All the required electric works of this

equipment should be carried out by

electricians, qualified electronics or

competent people according to the electrical

technical regulations of each country.

The alimentation requires an automatic

bipolar switch with

separation between contacts.

Flammable materials must not be

placed within a radius of 1 meter of

the equipment

(see instruction manual

of video projector to be installed).

Secure and protect the alimentation cables

and hoses, gear, material, etc. in such a way

that they are not near: moving parts or heat

sources.

The equipment must be installed in the

ceiling at a distance so that it is not within

arms reach of a person. Secured above the

site itself or on a metallic bracket strong

enough to hold the weight of the equipment

plus the image projector.

The equipment operation is: for interior use

in a false ceilings.

T I M E

The operating position is horizontal with the

hatch facing downward.

The equipment will not be accessible during

operation, before accessing the means of

connection or the inside of the equipment,

all electrical alimentation circuits of the

equipment must be disconnected.

In the event of any questions, contact the

Technical Service or your distributor.

SAFETY

The equipment should be examined every

90 days, the structure fasteners, movable

parts, mechanical cables, electrical parts, etc.

should be checked and lubricated if

necessary.

Do not install this unit in an unstable place.

Do not alter neither modify this unit.

Do not use this unit in a bathroom neither

MINIMUM

3 mm

near liquids or inflammable gases.

Do not connect the unit to an electric tension

different from the one specified.

Do not force the storm door in their opening

or closing journey, since the mechanics of

the motor could be seriously damaged.