AVS Uriel Systems HD1600F-PDR Hızlı Kılavuz - Sayfa 2

DVR AVS Uriel Systems HD1600F-PDR için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. AVS Uriel Systems HD1600F-PDR 6 sayfaları.

Connecting different components

Connecting to a monitor

Please check the monitor resolution before connecting to a monitor.
 Using HDMI&VGA Port : 1920 x 1080p
<Warning>
Use of HDMI certified cable is recommended when connecting to a HDMI Monitor.

Connecting to a camera

Please connect 1080p, 720p, 960H or NTSC/PAL camera using the recommended cable
PoC Camera
If PoC cameras and PoC adaptor are connected to a DVR, DVR supplies necessary power to cameras through
coaxial cable, and DVR can control cameras through coaxial cable without RS-485 cable installation.
Recommended Cables
Cable Category
5C2V
4C-FB(T), 4C-HFB(T), RG59
5C-FB(T), 5C-HFB, L-6CHD, RG6
5C-HFBT
<Warning>
 Transmission distance will be affected by cable types and installation site environment
 Transmission distance of cables shows differences based on the attenuation factor at 750MHz.
(dB/100m < 25dB is recommended)
 Foamed or high-foamed trishield cable is recommended.
 Coaxial cable and BNC connector must have 75Ω impedance.
 Careful to cable deformation due to high pressure over the cable.
 Don't pull the cable with too much force.
 During the arrangement of the coaxial cables at the rear of the rack, if tied too tightly, inside/outside
insulator of cable could be deformed, so tie it loosely within cable's curvature range.
2
HD-SDI transmit
distance(*)
about 90M
about 140M
about 180M
about 200M
Applications
Analog cable
High-foamed cable (Double or Trishield
recommended)
Cable for HD-SDI
Cable for HD-SDI
* Depends on manufacturer and models.