Dell E103S Kurulum ve Servis Kılavuzu - Sayfa 18
Sunucu Dell E103S için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Dell E103S 34 sayfaları.
Sayfayı Yazdır
Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
XR8000r chassis
•
Rear cover
•
Power module assembly
•
Power supply unit
Safety instructions
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE:
It is recommended that you always use an antistatic mat and antistatic strap while working on components inside
the system.
Before working inside your system
Prerequisites
Follow the safety guidelines listed in the
Steps
1. Disconnect the system from the electrical outlet and disconnect the peripherals.
2. If applicable, remove the system from the rack.
For more information, see the Rail Installation Guide relevant to your rail solutions at www.dell.com/poweredgemanuals.
After working inside your system
Prerequisites
Follow the safety guidelines listed in
Steps
1. If applicable, install the system into the rack.
For more information, see the Rail Installation Guide relevant to your system at www.dell.com/poweredgemanuals.
2. Reconnect the peripherals and connect the system to the electrical outlet, and then power on the system.
18
Installing and removing system components
Safety
instructions.
Safety
instructions.
4