Dell E103S Kurulum ve Servis Kılavuzu - Sayfa 19

Sunucu Dell E103S için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Dell E103S 34 sayfaları.

Recommended tools

You may need some or all of the following tools to perform the removal and installation procedures:

You need the following tools to assemble the cables for a DC power supply unit:

● AMP 90871-1 hand-crimping tool or equivalent

● Tyco Electronics 58433-3 or equivalent

● Wire-stripper pliers to remove insulation from size 10 AWG solid or stranded, insulated copper wire

NOTE:

Use alpha wire part number 3080 or equivalent (65/30 stranding).

NOTE:

For information about DC PSU cabling instructions, see the Cabling instructions for - (48 - 60) V DC power

supply Tech sheet that is shipped with your DC PSU or go to https://www.dell.com/poweredgemanuals > XR Servers >

PowerEdge XR8000r > Select This Product > Documentation > Manuals and Documents > Cabling instructions for - 48 - 60

V DC power supply

Prerequisites

Follow the safety guidelines listed in

Steps

Pull the sled blank to remove it from the enclosure.

Figure 11. Removing a sled blank

Next steps

Install a sled

sled

blank.

Safety

instructions.

Installing and removing system components