Dell Force10 C150 Hızlı Başlangıç Kılavuzu - Sayfa 24
Sunucu Dell Force10 C150 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dell Force10 C150 33 sayfaları. Quick start guide
Sayfayı Yazdır
Cable and Adapter Pin Assignments
Use the console port on the RPM of the C150 or C300 to connect to a terminal
port, PC serial port, or a terminal server to configure and monitor your system.
An RJ-45 Ethernet cable is required to connect to the Ethernet port.
The console port is an RJ-45 and the pinouts are listed in Table 2-1.
Table 2-1. Pin Assignments for Console Port (RJ-45)
Pin
1
NC (unused
2
3
4
5
6
7
8
NC (unused
Accessing the Console with a DB-9 Adapter
You can connect to the console using an RJ-45 to RJ-45 rollover cable and an
RJ-45 to DB-9 female DTE adapter (labeled "TERMINAL") to a terminal
server (for example, PC).
Table 2-2. Pin Assignments Between the Console and a DTE Terminal Server
Console Port
RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-9
Signal
RJ-45 Pinout
RTS
DTR
TxD
GND
22
Installing the Software
Signal
Input/Output
-
DTR
Output
TxD
Output
GND
-
GND
-
RxD
Input
DSR
Input
-
RJ-45 Pinout
1
8
2
7
3
6
4
5
Terminal
Adapter
Server Device
DB-9 Pin
Signal
8
CTS
6
DSR
2
RxD
5
GND