Dell PowerEdge 1855 Kullanıcı Kılavuzu - Sayfa 22

Sunucu Dell PowerEdge 1855 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerEdge 1855 33 sayfaları. Using dell blade servers in a dell poweredge high availability cluster
Ayrıca Dell PowerEdge 1855 için: Bilgi Güncellemesi (2 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Kullanım Kılavuzu (44 sayfalar)

Sayfayı Yazdır

Main Screen

When you enter the System Setup program, the main System Setup program screen appears (see Figure 2-1).

Figure 2-1. Main System Setup Program Screen

Table 2-2

lists the options and descriptions for the information fields that appear on the main System Setup program screen.

NOTE:

The options for the System Setup program change based on the system configuration.

NOTE:

The System Setup program defaults are listed under their respective options, where applicable.

Table 2-2. System Setup Program Options

Option

Description

System Time

Resets the time on the system's internal clock.

System Date

Resets the date on the system's internal calendar.

System Memory

Displays the amount of system memory. This option does not have user-selectable settings.

Video Memory

Displays the amount of video memory. This option does not have user-selectable settings.

System Memory

Determines if memory is being tested during POST.

Testing

(Enabled default)

OS Install Mode

Determines the maximum amount of memory available to the operating system. On sets the maximum memory to 256 MB. Off makes all

(Off default)

of the system memory available to the operating system. Some operating systems cannot install with more than 2 GB of system memory.

Enable this option (On) during operating system installation and disable (Off) after installation.

CPU Information

See

"CPU Information

Boot Sequence

Determines the order in which the system searches for boot devices during system startup. Available options can include the USB

diskette drive, USB CD drive, hard drives, and USB flash drive.

NOTE:

A USB device will be displayed in the boot order screen only if it is attached to the system before the system enters BIOS

Hard-Disk Drive

Determines the order in which the system searches the hard drives during system startup. The selections depend on the hard drives

Sequence

installed in your system.

USB Flash Drive

Determines the emulation type for a USB flash drive. Hard disk allows the USB flash drive to act as a hard drive. Floppy allows the USB

Emulation Type

flash drive to act as a removable diskette drive. Auto automatically chooses an emulation type.

(Auto default)

Integrated

See

"Integrated Devices

Devices

PCI IRQ

Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion cards that

Assignment

require an IRQ.

Console

See

"Console Redirection

Redirection

System Security

Displays a screen to configure the system password and setup password features. See

Setup

Password" for more information.

Keyboard

Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-key

NumLock

keyboards).

(On default)

Report Keyboard

Enables or disables reporting of keyboard errors during the POST. Select Report for host systems that have keyboards attached. Select

Errors

Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting does not affect

(Report default)

the operation of the keyboard itself if a keyboard is attached to the system.

Asset Tag

Displays the customer-programmable asset tag number for the system if an asset tag number has been assigned. To enter an asset tag

number of up to 10 characters into NVRAM, see "Acquiring the asset.com

Screen."

"Using the System

Utility."

Password" and

"Using the