Dell E2211H Kullanıcı Kılavuzu - Sayfa 32

Monitör Dell E2211H için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell E2211H 34 sayfaları. User's guide
Ayrıca Dell E2211H için: Hızlı Kurulum (2 sayfalar), Kullanıcı Kılavuzu (34 sayfalar)

Sayfayı Yazdır
Dell E2211H Kullanıcı Kılavuzu
Missing Color
Wrong Color
Image retention from a static
image left on the monitor for a 
long period of time

Product Specific Problems

Specific Symptoms
Screen image is too small
Cannot adjust the monitor with
the buttons on the front panel
No Input Signal when user
controls are pressed
The picture does not fill the
entire screen.
NOTE:
When choosing DVI-D mode, the Auto Adjust function will not be available.
Dell™ Soundbar Problems
Common Symptoms
No Sound
No Sound
Distorted Sound
Distorted Sound
Unbalanced Sound Output
Low Volume
Downloaded from ManualMonitor.com Manuals
Picture missing color
Perform monitor self-test feature check.
l
Ensure that the video cable connecting the monitor to the computer is connected
l
properly and is secure.
Check for bent or broken pins in the video cable connector.
l
Picture color not good
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video
l
depending on the application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color
l
Settings OSD if the Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
l
Run the built-in diagnostics.
l
Faint shadow from the static
Use the Power Management feature to turn off the monitor at all times when not in use
l
image displayed appears on
(for more information, see
the screen
Alternatively, use a dynamically changing screensaver.
l
What You Experience
Image is centered on screen,
Check the Scaling Ratio setting in Image Setting OSD
l
but does not fill entire viewing
Reset the monitor to Factory Settings.
l
area
OSD does not appear on the
Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
l
screen
No picture, the LED light is
Check the signal source. Ensure the Computer is not in the power saving mode by
l
moving the mouse or pressing any key on the keyboard.
green. When you press "+", "-"
Check to make sure Video Source to S-Video, Composite or Component is powered and
or "Menu" key, the message
l
playing video media.
"No S-Video input signal", or
Check whether the signal cable is plugged in properly. Re-plug the signal cable if
"No Composite input signal", or
l
necessary.
"No Component input signal"  
Reset the computer or video player.
appears
l
The picture cannot fill the
Due to different video formats (aspect ratio) of DVDs, the monitor may display in full
l
height or width of the screen
screen.
Run the built-in diagnostics.
l
What You Experience
No power to Soundbar - the
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if
l
power indicator is off
the power indicator (Blue LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the adapter.
l
Soundbar has power - power
Plug the audio line-in cable into the computer's audio out jack.
l
indicator is on
Set all Windows volume controls to their maximum
l
Play some audio content on the computer (i.e. audio CD, or MP3).
l
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
l
Clean and reseat the audio line-in plug.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Computer's sound card is used
Clear any obstructions between the Soundbar and the user.
l
as the audio source
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
l
Set all Windows volume controls to their midpoints.
l
Decrease the volume of the audio application.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Other audio source is used
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the audio
l
source.
Decrease the volume of the audio source.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Sound from only one side of
Clear any obstructions between the Soundbar and the user.
l
Soundbar
Confirm that the audio line-in plug is completely inserted into the jack of the sound card
l
or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Volume is too low
Clear any obstructions between the Soundbar and the user.
l
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume
l
setting.
Set all Windows volume controls to their maximum.
l
Increase the volume of the audio application.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Power Management
Modes).
Possible Solutions
Possible Solutions