Dell PowerEdge 5160 Kurulum Kılavuzu - Sayfa 9

Depolama Dell PowerEdge 5160 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerEdge 5160 42 sayfaları. Installing the external drive bay
Ayrıca Dell PowerEdge 5160 için: Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (28 sayfalar), Güncelleme Kılavuzu (8 sayfalar), Bilgi Güncellemesi (8 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Raf Kurulumu (34 sayfalar), Donanım Kurulum Kılavuzu (40 sayfalar), Kurulum Kılavuzu (36 sayfalar)

(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\opal\ts\Romb\8648Reb0.fm

support.dell.com

RAID battery

Figure 1-5. Threading the Battery Cable Through the Clip

10. Connect the battery to the RAID battery connector (RAID_BTRY) on the system

board (see Figure 1-1).

11. Replace the cooling shroud and computer cover; reconnect the computer and

peripherals to their AC power sources and turn them on.

12. Install the RAID software.

For details, refer to the RAID controller documentation.

Changing the System Setup Settings

For more information on the System Setup program, see "Using the System Setup

Program" in your system User's Guide.

To enter the System Setup program, perform the following steps:

Turn on your system.

If your system is already on, shut it down and then turn it on again.

DELL CONFIDENTIAL - Preliminary

1/14/00

Dell PowerEdge 4400 Systems—Activating the PERC 3/Di

clip

battery cable

1-5