Dell PowerEdge 6400 Montaj ve Kurulum - Sayfa 7

Anahtar Dell PowerEdge 6400 için çevrimiçi göz atın veya pdf Montaj ve Kurulum indirin. Dell PowerEdge 6400 32 sayfaları. Wake-on-lan (wol) support on dell servers
Ayrıca Dell PowerEdge 6400 için: Raf Kurulumu (37 sayfalar), Yükseltme Kurulum Kılavuzu (42 sayfalar), Raf Kurulumu (34 sayfalar), Kurulum Kılavuzu (42 sayfalar), Kurulum Kılavuzu (37 sayfalar), Manuel (10 sayfalar), Kurulum (4 sayfalar), Manuel (10 sayfalar), Manuel (15 sayfalar)

Sayfayı Yazdır
Dell PowerEdge 6400 Montaj ve Kurulum
support.dell.com
NOTE: If you cannot locate an unused connector on the DC power harness, discon-
nect the power cable from a peripheral device close to the fan assembly. Next,
connect the power cable to the fan assembly, and connect the remaining fan assem-
bly power connector to the peripheral device.
expansion-card
bracket
9.
If you disconnected any interface cables between expansion card(s) and the SCSI
backplane board, connect the interface cables to the SCSI backplane board.
NOTE: Route interface cables from the expansion card(s) to the side of the
expansion-card cooling fan assembly (see Figure 1-2).
10. Examine all cable connections, especially those that might have come loose dur-
ing your work. Fold cables out of the way so that they do not catch on the system
cover.
11. Replace the system cover.
12. Reconnect the system and devices to their electrical outlets, and turn them on.
fan assembly
bracket
fan assembly
DC power connectors (2)
SCSI cable(s)
Installation Information
bracket
thumbscrew
cooling
fan assembly
1-3