Miele DA 360 Kullanım ve Kurulum Kılavuzu - Sayfa 19

Havalandırma Davlumbazı Miele DA 360 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Miele DA 360 24 sayfaları. Cooker

If site conditions are not suitable for the

cooker hood to be used for air

extraction the appliance must be

connected for recirculation.

The following parts, available through

your Miele Dealer or from the Miele

Spare Parts Department are required

for operating the appliance in

recirculation mode:

– Conversion kit for

recirculation mode

(C 125 mm):

exhaust grille,

hose, hose clip

– 2 Active charcoal

filters (see

"Technical data")

^ When fitting the cooker hood in a wall

unit the exhaust grille b has to be

fitted in the top of the unit.

^ The exhaust connection a and the

exhaust grille b are joined together

using a suitable hose or flexible

ducting c.

If the front of the unit is ceiling height

(i.e, extractor canopies, ceiling

mounted units) then an appropriate

cut-out must be made in the front

panel d .

When fitting the ventilation grille make

sure that the slats in the grille point

towards the centre of the room and

not directly towards a wall or the

ceiling.

^ Install the active charcoal filters (see

"Cleaning and care").

^ Connect the appliance to the mains

via a fused spur or fused socket as

appropriate.

Before connecting the appliance

read the safety notes in "Warning

and Safety instructions" and in the

"Electrical connection" section.